考虑岩石抗拉强度受围压影响的地层破裂压模型

预测地层破裂压力是地下流体注入工程中的关键问题，关系到工程的稳定性和安全性。根据地测资料，岩石的抗拉强度会随着围压产生变化，然而目前常见的地层破裂压预测模型均未考虑该因素。基于厚壁圆筒法，针对2种砂岩开展不同围压条件下的砂岩致裂试验，根据试验数据，计算各组试验中试样的抗拉强度，并拟合围压与岩石抗拉强度的关系函数。研究岩石抗拉强度随围压变化的规律，提出能在实际地层中表征该规律的参数，基于该参数对现有的地层破裂压模型进行修正，并结合实测数据验证修正模型的可靠性。研究结果表明:岩石的抗拉强度随着围压的增加呈现明显的线性正相关关系，低围压下，新模型的预测结果与实测数据较为接近。随着围压增加，二者的差异逐渐增大，说明选取的特征参数在低围压下能较好地描述抗拉强度受围压的影响效应，而高围压下参数的取值需进一步研究。     

电气柜疲劳强度校核及结构优化

针对多孔闭孔型发泡硅橡胶D型空心密封条的超弹性特性,通过试验找出了密封条回弹力与压缩量之间的关系,提出了密封条满足IP X5的判别方程式,同时对方程式进行了试验验证,最后对密封条进行了阿累尼乌斯图寿命推算,为变流器柜门IP防护设计提供了重要参考。     

基于RFPA2D复合局部挠曲岩体数值模拟

为研究复合局部挠曲岩体强度特征以及破坏规律，采用岩石真实破裂软件RFPA^2D，对水平层面挠曲30°，45°，60°，75°的复合岩体进行单轴压缩试验模拟。模拟结果表明:挠曲角为30°，45°，60°，75°的复合岩体破坏面几乎与挠曲段夹层重合，其挠曲端部均产生了垂直于挠曲段夹层的裂纹；复合单斜岩体与复合挠曲岩体破坏面的形成因素大致相同，夹层强度是2种岩体失稳的主要因素；复合挠曲岩体单轴抗压强度随挠曲角增大同样呈“U”型变化，与单斜岩体变化趋势一致；当水平层状岩体发生挠曲后，其单轴抗压强度减小，当挠曲角为60°时，强度降低25.19%，当挠曲角为75°时，强度降低0.17%。；随着均质系数m的增大，复合挠曲岩体单轴抗压强度以及轴向应变均出现逐渐递增的趋势，且不同m值，其岩体裂隙扩展方式具有明显差别。     

岩石溶蚀的表现特征及其对物理力学性质的影响

本文以微晶白云石大理岩和黏土质长石砂岩为研究对象,以现场实测及室内试验资料为基础,对岩石溶蚀的表现特征及其对表层物理力学性质的影响进行了研究。研究表明:1)在岩石发生溶蚀的区域,由表及里易溶性矿物成分和易迁移元素氧化物的含量逐渐增加、黏土矿物含量和烧失率逐渐减少,岩样的微观结构也发生了变化,主要表现为岩石表层溶孔、溶隙发育,易溶矿物颗粒表面出现溶孔、溶坑、颗粒间出现溶蚀裂隙等;2)溶蚀使岩石表层强度降低、吸水率增大,溶蚀愈严重表层强度越低、均匀性愈差,吸水率愈大;溶蚀还使岩石的孔隙度及孔隙尺寸明显增大。     

基于强度折减法的港珠澳大桥沉管隧道干坞工程高边坡稳定性分析

在列举和分析比较当前岩土工程领域边坡稳定性分析的各种主要方法的基础上,概述了强度折减法的基本原理、主要特点和优势,并以港珠澳大桥沉管隧道干坞大型临时工程拟建场地的岩质高边坡为实例,应用强度折减法基于FLAC3D软件对该边坡的稳定性进行了计算和分析,确定了边界条件和强度参数,计算了该边坡的安全系数,结果表明自然工况下边坡处于稳定状态,底部开挖以后边坡趋于欠稳定状态,同时指出了边坡的关键变形部位,可为后续的设计和施工提供参考。     

基于GH-B强度准则的节理岩质边坡稳定性分析

在岩质边坡工程数值模拟计算分析中,其难题之一就是如何较准确地确定岩体强度参数,而边坡岩体抗剪强度是影响计算分析成果的控制因素,也是支护设计成败的关键所在。采用GH-B强度准则对深水河大桥4号桥墩边坡进行了稳定性分析,同时与采用M-C强度准则的模拟结果进行了对比分析。结果表明:GH-B强度准则采用基于应力水平的塑性流动法则,更好地体现了节理岩体的变形和破坏机理,可有效反映岩体的非线性破坏特征,更加接近于工程实际,适于节理岩体的强度计算及稳定性分析。     

Effect of chemical and thermal activations on the properties of rice husk ash-based solidified wastes

Strength development,leachability and microstructure of heavy metals from the solidified waste using synthesis rice husk ash (sRHA) and lime blended at the weight ratio of 1:1 were used as binders.The heavy metal-containing sludge was used at the level of 0 wt.%,30 wt.%,and 50 wt.% dry weight,respectively.The sample specimens with and without 1.5 wt.% of sodium silicate (SiO 2 /Na 2 O=1.0) were cured under the ambient condition and elevated temperature curing at 50°C for 24 hr.Experimental results showed that the introduction of sodium silicate solution and elevated temperature curing to sRHA-based solidified waste containing 30 wt.% of heavy metal sludge gave one day strength of 20 kg/cm 2 compared to 0.9 kg/cm2 for the control sample.XRD patterns indicated that most metal-sulfides present in the sludge were appeared in the solidified waste and SEM coupled with EDX techniques reveal these metal-sulfide particles were trapped within the lime-sRHA matrices.In addition,cumulative leaching behavior by tank test (EA NEN 7375:2004) showed that solidified waste containing up to 30 wt.% of heavy metal sludge was suitable to dispose in a secured landfill.     

Effect of ionic strength on adsorption of As（Ⅲ） and As（Ⅴ） on variable charge soils

The study was to investigate the adsorption behavior of arsenite (As(Ⅲ)) and arsenate (As(Ⅴ)) on two variable charge soils, i.e., Haplic Acrisol and Rhodic Ferralsol at different ionic strengths and pH with batch methods. Results indicated that the amount of As(Ⅲ) adsorbed by these two soils increased with increasing solution pH, whereas it decreased with increasing ionic strength under the acidic condition. This suggested that As(Ⅲ) was mainly adsorbed on soil positive charge sites through electrostatic attraction under the acidic condition. Moreover, intersects of As(Ⅴ) adsorption-pH curves at different ionic strengths (a characteristic pH) are obtained for both soils. It was noted that above this pH, the adsorption of As(Ⅴ) was increased with increasing ionic strength, whereas below it the reverse trend was true. Precisely the intersect pH was 3.6 for Haplic Acrisol and 4.5 for Rhodic Ferralsol, which was near the values of PZSE (soil point of zero salt effect) of these soils. The effects of ionic strength and pH on arsenate adsorption by these soils were interpreted by the adsorption model. The results of zeta potential suggested that the potential in adsorption plane becomes less negative with increasing ionic strength above soil PZSE and decreases with increasing ionic strength below soil PZSE. These results further supported the hypothesis of the adsorption model that the potential in the adsorption plane changes with ionic strength with an opposite trend to surface charge of the soils. Therefore, the change of the potential in the adsorption plane was mainly responsible for the change of arsenate adsorption induced by ionic strength on variable charge soils.     

絮体性能及其工艺调控的研究与进展

絮体结构和强度特征是絮凝过程的重要参数.在简要回顾絮体分形结构研究的基础上,对絮体结构与强度的测定方法、絮体结构形成的影响因素及其工艺调控的研究进展进行了概括性介绍.结合部分实验研究,着重讨论了水力条件对于絮体性能的影响和絮体重组、历史的演化机理,结果表明,逐步增强的水力剪切条件有助于改善絮体的结构和强度.     

极地冻土低温力学特性及井眼坍塌风险分析*

为解决极地冻土区油气资源储量极大但其力学特性和钻井井壁失稳机理尚不清晰的问题,对冻土岩样开展低温三轴力学特性实验,并基于此开展钻井井壁坍塌失稳相关数值模拟分析。结果表明:冻土的极限强度会随温度的降低和围压的增大而逐渐提高;冻土弹性模量尽管会随温度的降低而增加,但受围压影响较小,而泊松比基本不受温度及围压的影响;冻土内聚力会随实验温度的降低得到较大幅度提升,但不同实验温度范围内温度对冻土内聚力的影响程度存在差异,实验温度高于-12.5 ℃时温度对冻土内聚力的影响较强;极地冻土储层钻井过程近井地带冰的分解会随钻井作业的进行而逐渐变慢,冰的最终分解前缘位置为0.079 6 m,井眼扩大率达到63.51%。研究结果可为极地冻土层油气资源钻井作业设计提供参考与指导。